Description
3-1/2″ Schedule 40 PVC 90� Bell End Elbows
Enable fast, easy and secure 90�directional changes in conduit runs and allow for design configurati…150
Enable fast, easy and secure 90�directional changes in conduit runs and allow for design configuration changes with Topaz�s Schedule 40 PVC 90� Bell End Elbows. A standard conduit bell comprises one end of elbow with the opposite finished in a spigot or plain end. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2� to 6.�
- A section of Schedule 40 PVC conduit which has been heated and bent to enable a 90� directional change in a conduit run
- A standard conduit bell is formed on one end while the other end is a spigot(plain) end
- Both ends are solvent weld
- A section of Schedule 40 PVC conduit which has been heated and bent to enable a 90� directional change in a conduit run
- A standard conduit bell is formed on one end while the other end is a spigot(plain) end
- Both ends are solvent weld
| UPC | 751338231726 |
|---|---|
| UNSPSC | 39131717 |
| Country of Origin | MUL |
| Material: | PVC |
| Size: | 3-1/2 IN |
| Type: | 90 DEG Elbow |
| Bend Radius: | 15 IN |
| Installation Type: | Compression |
| Label Description: | 90° BELL END ELBOW |
| Material: | PVC |
| Size: | 3-1/2 IN |
| Size (IN): | 3-1/2″ IN |
| Size (trade) (IN): | 3-1/2 IN |
| Standard: | UL E170258, UL 514B, Federal Specification A-A-50563, NEMA/ANSI FB-1, Military Specification W-F-406D, W-F-406E, W-F-408D, W-S-610D |
| Trade Size: | 3.5 in |
| Type: | 90 DEG Elbow |
| Wall Thickness: | Schedule 40 |
Reviews
There are no reviews yet.