Description
Description
Fill edge gaps under double-gang electrical device covers with this deep .22″ filler ring. Slightly less than 1/4″ thick, these extension rings fill gaps created by bulky electrical outlets, dimming switches, and other devices that can’t be fully seated in a shallow masonry box. Also builds up surfaces where drywall isn’t flush with the top of an electrical box. Stack rings as needed to create a custom depth.
Use with a standard 2-gang standard size faceplate and with most electrical devices including rocker or toggles switches, light dimmers & electrical outlets.
Features
- 4.5″ H x 4.56″ W x .22″ D – ring designed to exactly fit our two gang covers
- large inner opening 4.25″ H x 4.25″ W to clear 2-gang boxes
- provides a cosmetic fix when mounting switchplates
- for flat surfaces – sand wall if bumps exist
- do not bend or ring may crack
- glossy acrylic, clean with warm water
- stackable to needed depth
- held in place by friction when faceplate is installed on top
- WARNING: for indoor decorative use only. Ensure devices are properly installed in box. Important: if using with protruding devices, must use fire safety box extenders and spacers to ensure devices are safely installed
- made exclusively by Kyle Switch Plates
- pair with deep lighting switch covers for added depth
- mounts externally – surface sits slightly under 1/4″ off wall
- made in America
Uses
- Hide approx. 1/4″ of electrical box edges that protrude from wall
- Build up area around double gang electrical boxes when bulky wiring causes devices to stick out too far
Reviews
There are no reviews yet.